ASTM D6227-04a - Standard Specification for Grade 82 Unleaded Aviation Gasoline
Publisher: ASTM International
Year: 2004
ASTM D6258-04 - Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
Publisher: ASTM International
Year: 2004
ASTM D6424-04a - Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
Publisher: ASTM International
Year: 2004
ASTM D6615-04a - Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
Publisher: ASTM International
Year: 2004
ASTM D2110-00 - Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 2000
ASTM D6732-04 - Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
Publisher: ASTM International
Year: 2004
ASTM D6468-99(2004) - Standard Test Method for High Temperature Stability of Distillate Fuels
Publisher: ASTM International
Year: 2004
ASTM D6812-04a - Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
Publisher: ASTM International
Year: 2004
ASTM D2111-95(2000) - Standard Test Methods for Specific Gravity of Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 2000
ASTM D445-04e1 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
Publisher: ASTM International
Year: 2004
ASTM D2270-04 - Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
Publisher: ASTM International
Year: 2004
ASTM D6708-04 - Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
Publisher: ASTM International
Year: 2004
ASTM D4930-94(2004)e1 - Standard Test Method for Dust Control Material on Calcined Petroleum Coke
Publisher: ASTM International
Year: 2004
ASTM D5004-89(2004)e1 - Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
Publisher: ASTM International
Year: 2004
ASTM D5799-95(2004) - Standard Test Method for Determination of Peroxides in Butadiene
Publisher: ASTM International
Year: 2004
ASTM D6426-04 - Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
Publisher: ASTM International
Year: 2004
ASTM D6667-04 - Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
Publisher: ASTM International
Year: 2004
ASTM D6729-04 - Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Meter Capillary High Resolution Gas Chromatography
Publisher: ASTM International
Year: 2004
ASTM D6792-04a - Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
Publisher: ASTM International
Year: 2004
ASTM D6824-04 - Standard Test Method for Determining Filterability of Aviation Turbine Fuel
Publisher: ASTM International
Year: 2004
ASTM D6985-04a - Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications (Withdrawn 2010)
Publisher: ASTM International
Year: 2004
ASTM D7094-04 - Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
Publisher: ASTM International
Year: 2004
ASTM D2119-96 - Standard Test Method for Aldehydes in Styrene Monomer
Publisher: ASTM International
Year: 1996
ASTM D2121-00 - Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
Publisher: ASTM International
Year: 2000
ASTM D2013-04 - Standard Practice of Preparing Coal Samples for Analysis
Publisher: ASTM International
Year: 2004
ASTM D6316-04 - Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
Publisher: ASTM International
Year: 2004
ASTM D4814-04b - Standard Specification for Automotive Spark-Ignition Engine Fuel
Publisher: ASTM International
Year: 2004
ASTM D2140-97 - Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin
Publisher: ASTM International
Year: 1997
ASTM D2156-94(1999) - Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
Publisher: ASTM International
Year: 1999
ASTM D2157-94(1999) - Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases From Burning Distillate Fuels
Publisher: ASTM International
Year: 1999
ASTM D2158-02 - Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
Publisher: ASTM International
Year: 2002
ASTM D2159-93 - Standard Test Method for Naphthenes in Saturates Fractions by Refractivity Intercept (Withdrawn 1998)
Publisher: ASTM International
ASTM D2854-96(2004) - Standard Test Method for Apparent Density of Activated Carbon
Publisher: ASTM International
Year: 2004
ASTM D5727-00(2004)e1 - Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
Publisher: ASTM International
Year: 2004
ASTM D242-04 - Standard Specification for Mineral Filler For Bituminous Paving Mixtures
Publisher: ASTM International
Year: 2004
ASTM D2163-91(1996) - Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography (Withdrawn 2005)
Publisher: ASTM International
Year: 1995
ASTM D1901-00(2004) - Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 2004
ASTM D4077-04 - Standard Specification for Cumene (Isopropylbenzene)
Publisher: ASTM International
Year: 2004
ASTM D7125-04 - Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process
Publisher: ASTM International
Year: 2004
ASTM D5912-96(2004) - Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug) (Withdrawn 2013)
Publisher: ASTM International
Year: 2004
ASTM D167-93(2004)e1 - Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
Publisher: ASTM International
Year: 2004
ASTM D3483-83(2005) - Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
Publisher: ASTM International
Year: 2004
ASTM D2234-00e1 - Standard Practice for Collection of a Gross Sample of Coal
Publisher: ASTM International
Year: 2001
ASTM C119-04b - Standard Terminology Relating to Dimension Stone
Publisher: ASTM International
Year: 2004
ASTM D2639-04e1 - Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
Publisher: ASTM International
Year: 2004
ASTM D5454-04 - Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
Publisher: ASTM International
Year: 2004
ASTM D7123-04 - Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3 CCl 2 H, Ar, and CF4 )
Publisher: ASTM International
Year: 2004
ASTM D7013-04 - Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup
Publisher: ASTM International
Year: 2004
ASTM D2268-93(1998) - Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
Publisher: ASTM International
Year: 1998
ASTM D2269-99 - Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
Publisher: ASTM International
Year: 1999
ASTM D975-04ce1 - Standard Specification for Diesel Fuel Oils
Publisher: ASTM International
Year: 2004
ASTM D1796-04 - Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
Publisher: ASTM International
Year: 2004
ASTM D2270-93(1998) - Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
Publisher: ASTM International
Year: 1998
ASTM F1785-97(2003)e1 - Standard Test Method for Performance of Steam Kettles
Publisher: ASTM International
Year: 2003
ASTM D2272-98 - Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
Publisher: ASTM International
Year: 1998
ASTM C108-46(2004) - Standard Symbols for Heat Transmission
Publisher: ASTM International
Year: 2004
ASTM D4084-05 - Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
Publisher: ASTM International
Year: 2005
ASTM D2274-01a - Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
Publisher: ASTM International
Year: 2001
ASTM D483-04 - Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
Publisher: ASTM International
Year: 2004
ASTM D976-04b - Standard Test Methods for Calculated Cetane Index of Distillate Fuels
Publisher: ASTM International
Year: 2004
ASTM D1093-04 - Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
Publisher: ASTM International
Year: 2004
ASTM D2269-99e1 - Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
Publisher: ASTM International
Year: 1999
ASTM D4196-05 - Standard Test Method for Confirming the Sterility of Membrane Filters
Publisher: ASTM International
Year: 2004
ASTM D2276-00 - Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
Publisher: ASTM International
Year: 2000
ASTM D1555-04a - Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
Publisher: ASTM International
Year: 2004
ASTM D1555M-04a - Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
Publisher: ASTM International
Year: 2004
ASTM D5194-04 - Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
Publisher: ASTM International
Year: 2004
ASTM D5471-04 - Standard Specification for O-Xylene 980
Publisher: ASTM International
Year: 2004
ASTM D6448-04 - Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
Publisher: ASTM International
Year: 2004
ASTM D4737-04 - Standard Test Method for Calculated Cetane Index by Four Variable Equation
Publisher: ASTM International
Year: 2004
ASTM D4815-04 - Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
Publisher: ASTM International
Year: 2004
ASTM D893-05 - Standard Test Method for Insolubles In Used Lubricating Oils
Publisher: ASTM International
Year: 2005
ASTM E2420-05 - Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities
Publisher: ASTM International
Year: 2004
ASTM E2421-05 - Standard Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities
Publisher: ASTM International
Year: 2004
ASTM D2306-00 - Standard Test Method for C8 Aromatic Hydrocarbon Analysis by Gas Chromatography (Withdrawn 2006)
Publisher: ASTM International
Year: 2000
ASTM C1615-05 - Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities
Publisher: ASTM International
Year: 2004
ASTM E2005-05 - Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
Publisher: ASTM International
Year: 2004
ASTM E2006-05 - Standard Guide for Benchmark Testing of Light Water Reactor Calculations
Publisher: ASTM International
Year: 2004
ASTM D5163-05 - Standard Guide for Establishing Procedures to Monitor the Performance of Service Level I Coatings in an Operating Nuclear Power Plant
Publisher: ASTM International
Year: 2004
ASTM D6169-98(2005) - Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
Publisher: ASTM International
Year: 2004
ASTM D2340-96 - Standard Test Method for Peroxides in Styrene Monomer
Publisher: ASTM International
Year: 1996
ASTM D7128-05 - Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
Publisher: ASTM International
Year: 2004
ASTM D4176-04e1 - Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
Publisher: ASTM International
Year: 2004
ASTM D2360-00 - Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
Publisher: ASTM International
Year: 2000
ASTM D2361-95(2001) - Standard Test Method for Chlorine in Coal
Publisher: ASTM International
Year: 2000
ASTM D5878-05 - Standard Guide for Using Rock Mass Classification Systems for Engineering Purposes
Publisher: ASTM International
Year: 2004
ASTM D5920-96(2005) - Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method (Withdrawn 2014)
Publisher: ASTM International
Year: 2004
ASTM D2384-83(2000)e1 - Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
Publisher: ASTM International
Year: 2000
ASTM D2386-01 - Standard Test Method for Freezing Point of Aviation Fuels
Publisher: ASTM International
Year: 2001
ASTM D2389-83(1994) - Standard Test Method for Minimum Pressure for Vapor Phase Ignition of Monopropellents (Withdrawn 2003)
Publisher: ASTM International
Year: 1993
ASTM D2392-96(2001)e1 - Standard Test Method for Color Of Dyed Aviation Gasolines
Publisher: ASTM International
Year: 2000
ASTM D7061-05 - Standard Test Method for Measuring n -Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
Publisher: ASTM International
Year: 2005
ASTM D5759-95(2005) - Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
Publisher: ASTM International
Year: 2005
ASTM D5842-04 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
Publisher: ASTM International
Year: 2004
ASTM D7124-05 - Standard Specification for Benzene for use with Zeolite Based Catalysts
Publisher: ASTM International
Year: 2005
ASTM D5471-04e1 - Standard Specification for O-Xylene 980
Publisher: ASTM International
Year: 2004
ASTM D3241-05 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
Publisher: ASTM International
Year: 2005
ASTM D2420-91(2001) - Standard Test Method for Hydrogen Sulfide In Liquefied Petroleum (LP) Gases (Lead Acetate Method)
Publisher: ASTM International
Year: 2000
ASTM D2421-02 - Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
Publisher: ASTM International
Year: 2002
ASTM D2425-99 - Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
Publisher: ASTM International
Year: 1999
ASTM D2426-93(1998) - Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
Publisher: ASTM International
Year: 1998
ASTM D6304-04ae1 - Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
Publisher: ASTM International
Year: 2004
ASTM D2427-92(2001) - Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography
Publisher: ASTM International
Year: 1992
ASTM D720-91(2004)e1 - Standard Test Method for Free-Swelling Index of Coal
Publisher: ASTM International
Year: 2004
ASTM D2441-95 - Standard Test Method for Hydrolyzable Chlorine Compounds in Chlorinated Aromatic Hydrocarbons (Askarels) by Refluxing (Withdrawn 2000)
Publisher: ASTM International
Year: 1994
ASTM D1835-05 - Standard Specification for Liquefied Petroleum (LP) Gases
Publisher: ASTM International
Year: 2005
ASTM D7061-05a - Standard Test Method for Measuring n -Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
Publisher: ASTM International
Year: 2005
ASTM D3682-01e1 - Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
Publisher: ASTM International
Year: 2001
ASTM D5163-05a - Standard Guide for Establishing Procedures to Monitor the Performance of Service Level I Coatings in an Operating Nuclear Power Plant
Publisher: ASTM International
Year: 2005
ASTM D5304-05 - Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
Publisher: ASTM International
Year: 2005
ASTM D976-04be1 - Standard Test Methods for Calculated Cetane Index of Distillate Fuels
Publisher: ASTM International
Year: 2004
ASTM E2071-00(2005) - Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
Publisher: ASTM International
Year: 2005
ASTM D2492-90(1998) - Standard Test Method for Forms of Sulfur in Coal
Publisher: ASTM International
Year: 1998
ASTM D6079-04e1 - Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
Publisher: ASTM International
Year: 2004
ASTM D7112-05 - Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
Publisher: ASTM International
Year: 2005
ASTM D525-05 - Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
Publisher: ASTM International
Year: 2005
ASTM D7111-05 - Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
Publisher: ASTM International
Year: 2005
ASTM D2500-99 - Standard Test Method for Cloud Point of Petroleum Products
Publisher: ASTM International
Year: 1999
ASTM D2501-91(2000) - Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
Publisher: ASTM International
Year: 2000
ASTM D2504-88(1998) - Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography
Publisher: ASTM International
Year: 1998
ASTM D2505-88(1998) - Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
Publisher: ASTM International
Year: 1998
ASTM D2507-93(2001) - Standard Terminology of Rheological Properties of Gelled Rocket Propellants (Withdrawn 2003)
Publisher: ASTM International
Year: 1993
ASTM D2896-05 - Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
Publisher: ASTM International
Year: 2005
ASTM E927-05 - Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing
Publisher: ASTM International
Year: 2005
ASTM E948-05 - Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
Publisher: ASTM International
Year: 2005
ASTM E973-05 - Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
Publisher: ASTM International
Year: 2005
ASTM E1038-05 - Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls
Publisher: ASTM International
Year: 2005
ASTM E1040-05 - Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
Publisher: ASTM International
Year: 2005
ASTM E1125-05 - Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
Publisher: ASTM International
Year: 2005
ASTM E1597-05 - Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
Publisher: ASTM International
Year: 2005
ASTM E2047-05 - Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
Publisher: ASTM International
Year: 2005
ASTM E2236-05 - Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
Publisher: ASTM International
Year: 2005
ASTM D1265-05 - Standard Practice for Sampling Liquefied Petroleum (LP) Gases (Manual Method)
Publisher: ASTM International
Year: 2005
ASTM D3230-05 - Standard Test Method for Salts in Crude Oil (Electrometric Method)
Publisher: ASTM International
Year: 2005
ASTM D3341-05 - Standard Test Method for Lead in Gasoline-Iodine Monochloride Method
Publisher: ASTM International
Year: 2005
ASTM E772-05 - Standard Terminology Relating to Solar Energy Conversion
Publisher: ASTM International
Year: 2005
ASTM D2539-93(2001) - Standard Test Method for Shock Sensitivity of Liquid Monopropellants by the Card-Gap Test (Withdrawn 2003)
Publisher: ASTM International
Year: 1993
ASTM D613-05 - Standard Test Method for Cetane Number of Diesel Fuel Oil
Publisher: ASTM International
Year: 2005
ASTM D6371-05 - Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
Publisher: ASTM International
Year: 2005
ASTM D2540-93(2001) - Standard Test Method for Drop-Weight Sensitivity of Liquid Monopropellants (Withdrawn 2003)
Publisher: ASTM International
Year: 1993
ASTM D6450-05 - Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
Publisher: ASTM International
Year: 2005
ASTM D2541-93(2001) - Standard Test Method for Critical Diameter and Detonation Velocity of Liquid Monopropellants (Withdrawn 2003)
Publisher: ASTM International
Year: 1993
ASTM D6542-05 - Standard Practice for Tonnage Calculation of Coal in a Stockpile
Publisher: ASTM International
Year: 2005
ASTM D2549-91(1995) - Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
Publisher: ASTM International
Year: 1994
ASTM D1568-05 - Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates
Publisher: ASTM International
Year: 2005
ASTM D2799-05 - Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
Publisher: ASTM International
Year: 2005
ASTM D7096-05 - Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
Publisher: ASTM International
Year: 2005
ASTM D5762-05 - Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
Publisher: ASTM International
Year: 2005
ASTM D3246-05 - Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
Publisher: ASTM International
Year: 2005
ASTM D129-00(2005) - Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
Publisher: ASTM International
Year: 2005
ASTM D565-99(2005) - Standard Test Method for Carbonizable Substances in White Mineral Oil
Publisher: ASTM International
Year: 2005
ASTM D1018-00(2005) - Standard Test Method for Hydrogen In Petroleum Fractions
Publisher: ASTM International
Year: 2005
ASTM D2593-93(1998) - Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
Publisher: ASTM International
Year: 1998
ASTM D1318-00(2005) - Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
Publisher: ASTM International
Year: 2005
ASTM D2789-95(2005) - Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
Publisher: ASTM International
Year: 2005
ASTM D3605-00(2005) - Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
Publisher: ASTM International
Year: 2005
ASTM D4046-91(2005) - Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
Publisher: ASTM International
Year: 2005
ASTM D4809-00(2005) - Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
Publisher: ASTM International
Year: 2005
ASTM D4868-00(2005) - Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
Publisher: ASTM International
Year: 2005
ASTM D5003-95(2005) - Standard Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke
Publisher: ASTM International
Year: 2005
ASTM D5384-95(2005) - Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
Publisher: ASTM International
Year: 2005
ASTM D7060-05 - Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
Publisher: ASTM International
Year: 2005
ASTM D7157-05 - Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
Publisher: ASTM International
Year: 2005
ASTM D2597-94(1999) - Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
Publisher: ASTM International
Year: 1999
ASTM D1839-91(2005) - Standard Test Method for Amyl Nitrate in Diesel Fuels
Publisher: ASTM International
Year: 2005
ASTM D2598-02 - Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
Publisher: ASTM International
Year: 2002
ASTM D5622-95(2005) - Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
Publisher: ASTM International
Year: 2005
ASTM D5709-95(2005) - Standard Test Method for Sieve Analysis of Petroleum Coke
Publisher: ASTM International
Year: 2005
ASTM D6430-99(2005) - Standard Guide for Using the Gravity Method for Subsurface Investigation
Publisher: ASTM International
Year: 2005
ASTM D121-05 - Standard Terminology of Coal and Coke
Publisher: ASTM International
Year: 2005
ASTM D5863-00a(2005) - Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
Publisher: ASTM International
Year: 2005
ASTM E2005-05e1 - Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
Publisher: ASTM International
Year: 2004
ASTM D2988-96(2005) - Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 2005
ASTM D3443-00(2005) - Standard Test Method for Chloride in Trichlorotrifluoroethane
Publisher: ASTM International
Year: 2005
ASTM D3444-00(2005) - Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
Publisher: ASTM International
Year: 2005
ASTM D3448-85(2005) - Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
Publisher: ASTM International
Year: 2005
ASTM D2622-98 - Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
Publisher: ASTM International
Year: 1998
ASTM D2624-01 - Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
Publisher: ASTM International
Year: 2001
ASTM D2106-05 - Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
Publisher: ASTM International
Year: 2005
ASTM D6368-05 - Standard Specification for Vapor-Degreasing Grade and General Grade normal -Propyl Bromide
Publisher: ASTM International
Year: 2005
ASTM D6596-00(2005) - Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
Publisher: ASTM International
Year: 2005
ASTM D2639-98 - Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
Publisher: ASTM International
Year: 1994
ASTM D156-02e1 - Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
Publisher: ASTM International
Year: 2002
ASTM D7152-05 - Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
Publisher: ASTM International
Year: 2005
ASTM E1171-04 - Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
Publisher: ASTM International
Year: 2004
ASTM D396-05 - Standard Specification for Fuel Oils
Publisher: ASTM International
Year: 2005
ASTM D6541-05 - Standard Specification for HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane, (CF3 CH 2 CF3 )
Publisher: ASTM International
Year: 2005
ASTM D2699-01a - Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
Publisher: ASTM International
Year: 2001
ASTM D2700-01a - Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
Publisher: ASTM International
Year: 2001
ASTM D2709-96(2001)e1 - Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
Publisher: ASTM International
Year: 2001
ASTM D92-05 - Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Publisher: ASTM International
Year: 2005
ASTM D97-05 - Standard Test Method for Pour Point of Petroleum Products
Publisher: ASTM International
Year: 2005
ASTM D2712-91(1996) - Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography
Publisher: ASTM International
Year: 1995
ASTM D6347/D6347M-05 - Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
Publisher: ASTM International
Year: 2005
ASTM D2713-91(2001) - Standard Test Method for Dryness of Propane (Valve Freeze Method)
Publisher: ASTM International
Year: 2000
ASTM D3483-05 - Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
Publisher: ASTM International
Year: 2005
ASTM D1655-05 - Standard Specification for Aviation Turbine Fuels
Publisher: ASTM International
Year: 2005
ASTM D3241-05a - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
Publisher: ASTM International
Year: 2005
ASTM D5972-02e1 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
Publisher: ASTM International
Year: 2002
ASTM D6615-05 - Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
Publisher: ASTM International
Year: 2005
ASTM D445-04e2 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
Publisher: ASTM International
Year: 2004
ASTM D975-05 - Standard Specification for Diesel Fuel Oils
Publisher: ASTM International
Year: 2005
ASTM D4814-04be1 - Standard Specification for Automotive Spark-Ignition Engine Fuel
Publisher: ASTM International
Year: 2004
ASTM D3712-05 - Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
Publisher: ASTM International
Year: 2005
ASTM D7167-05 - Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
Publisher: ASTM International
Year: 2005
ASTM D7171-05 - Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
Publisher: ASTM International
Year: 2005
ASTM D7154-05 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
Publisher: ASTM International
Year: 2005
ASTM D4807-05 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration
Publisher: ASTM International
Year: 2005
ASTM D5773-05 - Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
Publisher: ASTM International
Year: 2005
ASTM D7153-05 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
Publisher: ASTM International
Year: 2005
ASTM D2386-05 - Standard Test Method for Freezing Point of Aviation Fuels
Publisher: ASTM International
Year: 2005
ASTM D6563-05 - Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
Publisher: ASTM International
Year: 2005
ASTM D2782-01 - Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
Publisher: ASTM International
Year: 2001
ASTM D2784-98 - Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)
Publisher: ASTM International
Year: 1998
ASTM D2786-91(2001)e1 - Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
Publisher: ASTM International
Year: 1991
ASTM D2789-95(2000)e1 - Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
Publisher: ASTM International
Year: 1999
ASTM D97-05a - Standard Test Method for Pour Point of Petroleum Products
Publisher: ASTM International
Year: 2005
ASTM D92-05a - Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
Publisher: ASTM International
Year: 2005
ASTM D2795-95 - Standard Test Methods for Analysis of Coal and Coke Ash (Withdrawn 2001)
Publisher: ASTM International
Year: 1994
ASTM D2797-85(1999) - Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
Publisher: ASTM International
Year: 1999
ASTM D2799-99 - Standard Test Method for Microscopical Determination of Volume Percent of Physical Components of Coal
Publisher: ASTM International
Year: 1999
ASTM D5949-01e1 - Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
Publisher: ASTM International
Year: 2001
ASTM D86-05 - Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
Publisher: ASTM International
Year: 2005
ASTM D2500-05 - Standard Test Method for Cloud Point of Petroleum Products
Publisher: ASTM International
Year: 2005
ASTM D5771-05 - Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
Publisher: ASTM International
Year: 2005
ASTM D5772-05 - Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
Publisher: ASTM International
Year: 2005
ASTM D1685-05 - Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry (Withdrawn 2009)
Publisher: ASTM International
Year: 2005
ASTM D5713-05 - Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
Publisher: ASTM International
Year: 2005
ASTM D6792-05 - Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
Publisher: ASTM International
Year: 2005
ASTM E1819-96(2005) - Standard Guide for Environmental Monitoring Plans for Decommissioning of Nuclear Facilities
Publisher: ASTM International
Year: 2005
ASTM D2827-00 - Standard Specification for Styrene Monomer
Publisher: ASTM International
Year: 2000
ASTM D3797-05 - Standard Test Method for Analysis of o-Xylene by Gas Chromatography (Withdrawn 2014)
Publisher: ASTM International
Year: 2005
ASTM E1281-89(2005) - Standard Guide for Nuclear Facility Decommissioning Plans
Publisher: ASTM International
Year: 2005
ASTM D4006-81(2005) - Standard Test Method for Water in Crude Oil by Distillation
Publisher: ASTM International
Year: 2005
ASTM D4807-05e1 - Standard Test Method for Sediment in Crude Oil by Membrane Filtration
Publisher: ASTM International
Year: 2005
ASTM D7108-05 - Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
Publisher: ASTM International
Year: 2005
ASTM D2880-00 - Standard Specification for Gas Turbine Fuel Oils
Publisher: ASTM International
Year: 2000
ASTM D2885-95(1999) - Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
Publisher: ASTM International
Year: 1999
ASTM E973-05a - Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
Publisher: ASTM International
Year: 2005
ASTM E2236-05a - Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
Publisher: ASTM International
Year: 2005
ASTM D2887-01a - Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
Publisher: ASTM International
Year: 2001
ASTM D2889-95(2000) - Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
Publisher: ASTM International
Year: 2000
ASTM D2892-01 - Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
Publisher: ASTM International
Year: 2001
ASTM D2896-01e1 - Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
Publisher: ASTM International
Year: 2001
ASTM D4928-00(2005) - Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
Publisher: ASTM International
Year: 2005
ASTM D5854-96(2005) - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
Publisher: ASTM International
Year: 2005
ASTM D388-05 - Standard Classification of Coals by Rank
Publisher: ASTM International
Year: 2005
ASTM E948-05a - Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
Publisher: ASTM International
Year: 2005
ASTM D2799-05a - Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
Publisher: ASTM International
Year: 2005
ASTM D5671-95(2005) - Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
Publisher: ASTM International
Year: 2005
ASTM D6431-99(2005) - Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
Publisher: ASTM International
Year: 2005
ASTM D3802-79(2005) - Standard Test Method for Ball-Pan Hardness of Activated Carbon
Publisher: ASTM International
Year: 2005
ASTM D2935-96(2000) - Standard Test Method for Apparent Density of Industrial Aromatic Hydrocarbons (Withdrawn 2005)
Publisher: ASTM International
Year: 2000
ASTM D2944-71(1998) - Standard Test Method of Sampling Processed Peat Materials
Publisher: ASTM International
Year: 1998
ASTM D2961-01a - Standard Test Method for Single-Stage Total Moisture Less than 15% in Coal Reduced to 2.36-mm (No. 8 Sieve)Topsize
Publisher: ASTM International
Year: 2001
ASTM D807-05 - Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)
Publisher: ASTM International
Year: 2005
ASTM D130-04e1 - Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
Publisher: ASTM International
Year: 2004
ASTM D3230-05a - Standard Test Method for Salts in Crude Oil (Electrometric Method)
Publisher: ASTM International
Year: 2005
ASTM E816-05 - Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
Publisher: ASTM International
Year: 2005
ASTM D2158-05 - Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
Publisher: ASTM International
Year: 2005
ASTM D189-05 - Standard Test Method for Conradson Carbon Residue of Petroleum Products
Publisher: ASTM International
Year: 2005
ASTM D2622-05 - Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
Publisher: ASTM International
Year: 2005
ASTM D3228-05 - Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
Publisher: ASTM International
Year: 2005
ASTM D4175-05 - Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
Publisher: ASTM International
Year: 2005
ASTM D5185-05 - Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
Publisher: ASTM International
Year: 2005
ASTM E824-05 - Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
Publisher: ASTM International
Year: 2005
ASTM D2988-96(2000) - Standard Test Methods for Water-Soluble Halide Ion In Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 1999
ASTM D2989-01e1 - Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 2001
ASTM F2023-05 - Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
Publisher: ASTM International
Year: 2005
ASTM D5837-99(2005) - Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC)
Publisher: ASTM International
Year: 2005
ASTM D1094-00(2005) - Standard Test Method for Water Reaction of Aviation Fuels
Publisher: ASTM International
Year: 2005
ASTM D2501-91(2005) - Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
Publisher: ASTM International
Year: 2005
ASTM D2889-95(2005) - Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
Publisher: ASTM International
Year: 2005
ASTM D3238-95(2005) - Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
Publisher: ASTM International
Year: 2005
ASTM E2459-05 - Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
Publisher: ASTM International
Year: 2005
ASTM D3956-93(2003)e1 - Standard Specification for Methane Thermophysical Property Tables
Publisher: ASTM International
Year: 2003
ASTM D808-05 - Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method)
Publisher: ASTM International
Year: 2005
ASTM D3240-05 - Standard Test Method for Undissolved Water In Aviation Turbine Fuels
Publisher: ASTM International
Year: 2005
ASTM D3242-05 - Standard Test Method for Acidity in Aviation Turbine Fuel
Publisher: ASTM International
Year: 2005
ASTM D5002-99(2005) - Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
Publisher: ASTM International
Year: 2005
ASTM D5274-00(2005) - Standard Guide for Analysis of 1,3-Butadiene Product
Publisher: ASTM International
Year: 2005
ASTM D5599-00(2005) - Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
Publisher: ASTM International
Year: 2005
ASTM D6384-99a(2005) - Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
Publisher: ASTM International
Year: 2005
ASTM D3338-05 - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
Publisher: ASTM International
Year: 2005
ASTM D4860-91(2005) - Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)
Publisher: ASTM International
Year: 2005
ASTM D4864-90(2005) - Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
Publisher: ASTM International
Year: 2005
ASTM D5708-05 - Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
Publisher: ASTM International
Year: 2005
ASTM D6560-00(2005) - Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
Publisher: ASTM International
Year: 2005
ASTM D1550-94(2005) - Standard ASTM Butadiene Measurement Tables
Publisher: ASTM International
Year: 2005
ASTM D5972-05 - Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
Publisher: ASTM International
Year: 2005
ASTM D6376-05 - Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
Publisher: ASTM International
Year: 2005
ASTM D6550-05 - Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
Publisher: ASTM International
Year: 2005
ASTM D6615-05a - Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
Publisher: ASTM International
Year: 2005
ASTM G167-05 - Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
Publisher: ASTM International
Year: 2005
ASTM D7112-05a - Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
Publisher: ASTM International
Year: 2005
ASTM D3038-93(1999) - Standard Test Method for Drop Shatter Test for Coke
Publisher: ASTM International
Year: 1999
ASTM D2892-05 - Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
Publisher: ASTM International
Year: 2005
ASTM D3241-05b - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
Publisher: ASTM International
Year: 2005
ASTM D3343-05 - Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
Publisher: ASTM International
Year: 2005
ASTM D3054-98 - Standard Test Methods for Analysis of Cyclohexane by Gas Chromatography (Withdrawn 2007)
Publisher: ASTM International
Year: 1998
ASTM D1298-99(2005) - Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
Publisher: ASTM International
Year: 2005
ASTM D5881-95(2005) - Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
Publisher: ASTM International
Year: 2005
ASTM D3117-96e1 - Standard Test Method for Wax Appearance Point of Distillate Fuels
Publisher: ASTM International
Year: 1995
ASTM D7223-05 - Standard Specification for Aviation Certification Turbine Fuel
Publisher: ASTM International
Year: 2005
ASTM D7213-05 - Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography
Publisher: ASTM International
Year: 2005
ASTM D3131-02 - Standard Specification for Isopropyl Acetate (99% Grade)
Publisher: ASTM International
Year: 2002
ASTM D843-97(2006) - Standard Specification for Nitration Grade Xylene
Publisher: ASTM International
Year: 2005
ASTM D4538-05 - Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
Publisher: ASTM International
Year: 2005
ASTM D3948-05 - Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
Publisher: ASTM International
Year: 2005
ASTM D1129-04e1 - Standard Terminology Relating to Water
Publisher: ASTM International
Year: 2004
ASTM D3160-96a - Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)
Publisher: ASTM International
Year: 1995
ASTM D2276-05 - Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
Publisher: ASTM International
Year: 2005
ASTM D5452-05 - Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
Publisher: ASTM International
Year: 2005
ASTM D7224-05 - Standard Test Method for Determining Water Separation Characteristics of Kerosine-type Aviation Turbine Fuels Containing Additives by Portable Separometer
Publisher: ASTM International
Year: 2005
ASTM D3173-00 - Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
Publisher: ASTM International
Year: 2000
ASTM D3174-00 - Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
Publisher: ASTM International
Year: 2000
ASTM D3175-01 - Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
Publisher: ASTM International
Year: 2001
ASTM D4079-00(2006) - Standard Specification for Vapor-Degreasing Grade Methylene Chloride
Publisher: ASTM International
Year: 2005
ASTM D4080-00(2006) - Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
Publisher: ASTM International
Year: 2005
ASTM D4701-00(2006) - Standard Specification for Technical Grade Methylene Chloride
Publisher: ASTM International
Year: 2005
ASTM D6505-00(2006) - Standard Test Method for Assay of normal-Propyl Bromide Content
Publisher: ASTM International
Year: 2005
ASTM D3178-89(1997) - Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coal and Coke
Publisher: ASTM International
Year: 1996
ASTM D6708-05 - Standard Practice for Statistical Assessment and Improvement of the Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
Publisher: ASTM International
Year: 2005
ASTM D664-06 - Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
Publisher: ASTM International
Year: 2005
ASTM D1655-06 - Standard Specification for Aviation Turbine Fuels
Publisher: ASTM International
Year: 2005
ASTM D2386-06 - Standard Test Method for Freezing Point of Aviation Fuels
Publisher: ASTM International
Year: 2005
ASTM E1117-97(2006) - Standard Practice for Design of Fuel-Alcohol Manufacturing Facilities (Withdrawn 2009)
Publisher: ASTM International
Year: 2006
ASTM C1215-92(2006) - Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
Publisher: ASTM International
Year: 2005
ASTM C1009-06 - Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry
Publisher: ASTM International
Year: 2005
ASTM C1210-06 - Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
Publisher: ASTM International
Year: 2005
ASTM D3213-91(1997) - Standard Practices for Handling, Storing, and Preparing Soft Undisturbed Marine Soil
Publisher: ASTM International
Year: 1997
ASTM E1358-97(2006) - Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
Publisher: ASTM International
Year: 2006
ASTM D3227-02 - Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
Publisher: ASTM International
Year: 2002
ASTM D2624-06 - Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
Publisher: ASTM International
Year: 2005
ASTM D4530-06 - Standard Test Method for Determination of Carbon Residue (Micro Method)
Publisher: ASTM International
Year: 2005
ASTM D3228-01 - Standard Test Method for Total Nitrogen In Lubricating Oils and Fuel Oils By Modified Kjeldahl Method
Publisher: ASTM International
Year: 2001
ASTM D2896-06 - Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
Publisher: ASTM International
Year: 2005
ASTM D3230-99 - Standard Test Method for Salts in Crude Oil (Electrometric Method)
Publisher: ASTM International
Year: 1999
ASTM D3231-99 - Standard Test Method for Phosphorus in Gasoline
Publisher: ASTM International
Year: 1999
ASTM D3237-97 - Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
Publisher: ASTM International
Year: 1997
ASTM D3238-95(2000)e1 - Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
Publisher: ASTM International
Year: 2000
ASTM D3239-91(2001) - Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
Publisher: ASTM International
Year: 1991
ASTM D3240-91(2001) - Standard Test Method for Undissolved Water In Aviation Turbine Fuels
Publisher: ASTM International
Year: 1991
ASTM D3241-02 - Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
Publisher: ASTM International
Year: 2002
ASTM D3242-01 - Standard Test Method for Acidity in Aviation Turbine Fuel
Publisher: ASTM International
Year: 2001
ASTM D3245-96 - Standard Test Method for Pumpability of Industrial Fuel Oils
Publisher: ASTM International
Year: 1995
ASTM D7212-06 - Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
Publisher: ASTM International
Year: 2006
ASTM D7220-06 - Standard Test Method for Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry
Publisher: ASTM International
Year: 2006
ASTM D3246-96 - Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
Publisher: ASTM International
Year: 1995
ASTM D1129-06 - Standard Terminology Relating to Water
Publisher: ASTM International
Year: 2006
ASTM D3650-93(2006) - Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
Publisher: ASTM International
Year: 2006
ASTM D5839-96(2006) - Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry (Withdrawn 2015)
Publisher: ASTM International
Year: 2006
ASTM D7170-06 - Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils-Fixed Range Injection Period, Constant Volume Combustion Chamber Method
Publisher: ASTM International
Year: 2005
ASTM E1462-00(2006) - Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules
Publisher: ASTM International
Year: 2006
ASTM D2110-00(2006) - Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 2005
ASTM E974-00(2006) - Standard Guide for Specifying Thermal Performance of Geothermal Power Systems (Withdrawn 2015)
Publisher: ASTM International
Year: 2006
ASTM D3286-96 - Standard Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter (Withdrawn 2000)
Publisher: ASTM International
Year: 1995
ASTM D5194-06 - Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
Publisher: ASTM International
Year: 2006
ASTM D6391-06 - Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
Publisher: ASTM International
Year: 2006
ASTM D7236-06 - Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
Publisher: ASTM International
Year: 2005
ASTM D3302-00ae1 - Standard Test Method for Total Moisture in Coal
Publisher: ASTM International
Year: 2000
ASTM D7224-05e1 - Standard Test Method for Determining Water Separation Characteristics of Kerosine-type Aviation Turbine Fuels Containing Additives by Portable Separometer
Publisher: ASTM International
Year: 2005
ASTM E2481-06 - Standard Test Method for Hot Spot Protection Testing of Photovoltaic Modules
Publisher: ASTM International
Year: 2006
ASTM D3338-00 - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
Publisher: ASTM International
Year: 2000
ASTM D3339-95(2000)e1 - Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
Publisher: ASTM International
Year: 1999
ASTM D3341-00 - Standard Test Method for Lead in Gasoline-Iodine Monochloride Method
Publisher: ASTM International
Year: 2000
ASTM D3343-95(2000) - Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
Publisher: ASTM International
Year: 2000
ASTM D3682-01(2006) - Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
Publisher: ASTM International
Year: 2006
ASTM D3684-01(2006) - Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method (Withdrawn 2014)
Publisher: ASTM International
Year: 2006
ASTM E490-00a(2006) - Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
Publisher: ASTM International
Year: 2006
ASTM D3348-98 - Standard Test Method for Rapid Field Test for Trace Lead In Unleaded Gasoline (Colorimetric Method)
Publisher: ASTM International
Year: 1998
ASTM D6414-01(2006) - Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
Publisher: ASTM International
Year: 2006
ASTM D6543-00(2006) - Standard Guide to the Evaluation of Measurements Made by On-Line Coal Analyzers
Publisher: ASTM International
Year: 2006
ASTM D5347-95(2006) - Standard Test Method for Determination of the Ash Content of Fats and Oils
Publisher: ASTM International
Year: 2006
ASTM D5349-95(2006) - Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
Publisher: ASTM International
Year: 2006
ASTM D5354-95(2006) - Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
Publisher: ASTM International
Year: 2006
ASTM D5355-95(2006) - Standard Test Method for Specific Gravity of Oils and Liquid Fats
Publisher: ASTM International
Year: 2006
ASTM D5551-95(2006) - Standard Test Method for Determination of the Cloud Point of Oil
Publisher: ASTM International
Year: 2006
ASTM D5553-95(2006) - Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
Publisher: ASTM International
Year: 2006
ASTM D5554-95(2006) - Standard Test Method for Determination of the Iodine Value of Fats and Oils
Publisher: ASTM International
Year: 2006
ASTM D6895-03e1 - Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C
Publisher: ASTM International
Year: 2003
ASTM D6721-01(2006) - Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
Publisher: ASTM International
Year: 2006
ASTM D909-01e1 - Standard Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method
Publisher: ASTM International
Year: 2001
ASTM D2889-95(2005)e1 - Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
Publisher: ASTM International
Year: 2005
ASTM C119-06 - Standard Terminology Relating to Dimension Stone
Publisher: ASTM International
Year: 2006
ASTM D5348-95(2006) - Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
Publisher: ASTM International
Year: 1994
ASTM D3401-97(2001) - Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 2000
ASTM D3402-93(2001) - Standard Test Method for Tumbler Test for Coke
Publisher: ASTM International
Year: 1993
ASTM D3404-91(1998) - Standard Guide for Measuring Matric Potential in the Vadose Zone Using Tensiometers
Publisher: ASTM International
Year: 1998
ASTM D6751-06e1 - Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
Publisher: ASTM International
Year: 2006
ASTM D3437-99 - Standard Practice for Sampling and Handling Liquid Cyclic Products
Publisher: ASTM International
Year: 1999
ASTM D3438-99 - Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
Publisher: ASTM International
Year: 1999
ASTM D3443-00 - Standard Test Method for Chloride in Trichlorotrifluoroethane
Publisher: ASTM International
Year: 2000
ASTM D3444-00 - Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
Publisher: ASTM International
Year: 2000
ASTM D3448-85(2000) - Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
Publisher: ASTM International
Year: 2000
ASTM D6429-99(2006) - Standard Guide for Selecting Surface Geophysical Methods
Publisher: ASTM International
Year: 2006
ASTM D4430-00(2006) - Standard Practice for Determining the Operational Comparability of Meteorological Measurements
Publisher: ASTM International
Year: 2006
ASTM D4310-06 - Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
Publisher: ASTM International
Year: 2006
ASTM D5304-06 - Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
Publisher: ASTM International
Year: 2006
ASTM D3466-76(1998) - Standard Test Method for Ignition Temperature of Granular Activated Carbon
Publisher: ASTM International
Year: 1998
ASTM D2008-91(2006) - Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
Publisher: ASTM International
Year: 2006
ASTM D5983-06 - Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel
Publisher: ASTM International
Year: 2006
ASTM D6468-06 - Standard Test Method for High Temperature Stability of Distillate Fuels
Publisher: ASTM International
Year: 2006
ASTM D2109-01(2006) - Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 2006
ASTM D2989-01(2006) - Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 2006
ASTM D3401-97(2006) - Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
Publisher: ASTM International
Year: 2006
ASTM D5111-99(2006) - Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
Publisher: ASTM International
Year: 2006
ASTM D3483-83(1999) - Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
Publisher: ASTM International
Year: 1999
ASTM D287-92(2006) - Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
Publisher: ASTM International
Year: 2006
ASTM D2786-91(2006) - Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
Publisher: ASTM International
Year: 2006
ASTM D6368-06 - Standard Specification for Vapor-Degreasing Solvents Based on normal -Propyl Bromide and Technical Grade normal -Propyl Bromide
Publisher: ASTM International
Year: 2006
ASTM D3239-91(2006) - Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
Publisher: ASTM International
Year: 2006
ASTM D3701-01(2006) - Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
Publisher: ASTM International
Year: 2006
ASTM D3831-01(2006) - Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
Publisher: ASTM International
Year: 2006
ASTM D4418-00(2006) - Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
Publisher: ASTM International
Year: 2006
ASTM D4808-01(2006) - Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
Publisher: ASTM International
Year: 2006
ASTM D5184-01(2006) - Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
Publisher: ASTM International
Year: 2006
ASTM D5776-99(2006) - Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
Publisher: ASTM International
Year: 2006
ASTM D6032-02(2006) - Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
Publisher: ASTM International
Year: 2006
ASTM D6728-01(2006) - Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
Publisher: ASTM International
Year: 2006
ASTM D843-06 - Standard Specification for Nitration Grade Xylene
Publisher: ASTM International
Year: 2006
ASTM D1655-06a - Standard Specification for Aviation Turbine Fuels
Publisher: ASTM International
Year: 2006
ASTM D1988-06 - Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
Publisher: ASTM International
Year: 2006
ASTM D2709-96(2006) - Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
Publisher: ASTM International
Year: 2006
ASTM D3606-06 - Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
Publisher: ASTM International
Year: 2006
ASTM D4810-06 - Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
Publisher: ASTM International
Year: 2006
ASTM D4888-06 - Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
Publisher: ASTM International
Year: 2006
ASTM D4891-89(2006) - Standard Test Method for Heating Value of Gases in Natural Gas Range by Stoichiometric Combustion
Publisher: ASTM International
Year: 2006
ASTM D4984-06 - Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
Publisher: ASTM International
Year: 2006
ASTM D6615-06 - Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
Publisher: ASTM International
Year: 2006
ASTM D6792-06 - Standard Guide for Quality System in Petroleum Products and Lubricants Testing Laboratories
Publisher: ASTM International
Year: 2006
ASTM D7061-06 - Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
Publisher: ASTM International
Year: 2006
ASTM D445-06 - Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
Publisher: ASTM International
Year: 2006
ASTM D975-06 - Standard Specification for Diesel Fuel Oils
Publisher: ASTM International
Year: 2006
ASTM D1319-03e1 - Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
Publisher: ASTM International
Year: 2003
ASTM D4814-06 - Standard Specification for Automotive Spark-Ignition Engine Fuel
Publisher: ASTM International
Year: 2006
ASTM D5191-06 - Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
Publisher: ASTM International
Year: 2006
ASTM D1072-06 - Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
Publisher: ASTM International
Year: 2006
ASTM D7256/D7256M-06 - Standard Practice for Mechanical Collection and Within-System Preparation of a Gross Sample of Coal from Moving Streams
Publisher: ASTM International
Year: 2006
ASTM D7260-06 - Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
Publisher: ASTM International
Year: 2006
ASTM C992-06 - Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks
Publisher: ASTM International
Year: 2006
ASTM D1142-95(2006) - Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
Publisher: ASTM International
Year: 2006
ASTM D1946-90(2006) - Standard Practice for Analysis of Reformed Gas by Gas Chromatography
Publisher: ASTM International
Year: 2006
ASTM D3605-00 - Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
Publisher: ASTM International
Year: 2000
ASTM D3606-99 - Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
Publisher: ASTM International
Year: 1999
ASTM D2638-06 - Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
Publisher: ASTM International
Year: 2006
ASTM D7265-06 - Standard Specification for Hydrogen Thermophysical Property Tables
Publisher: ASTM International
Year: 2006
ASTM D5191-06e1 - Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
Publisher: ASTM International
Year: 2006
ASTM D5504-01(2006) - Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
Publisher: ASTM International
Year: 2006
ASTM D1160-06 - Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
Publisher: ASTM International
Year: 2006
ASTM D4310-06a - Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
Publisher: ASTM International
Year: 2006
ASTM D5783-95(2006) - Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
Publisher: ASTM International
Year: 2006
ASTM D6286-98(2006) - Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
Publisher: ASTM International
Year: 2006
ASTM D4530-06e1 - Standard Test Method for Determination of Carbon Residue (Micro Method)
Publisher: ASTM International
Year: 2005
ASTM D5003-06 - Standard Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke
Publisher: ASTM International
Year: 2006
ASTM D1405-01(2006) - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
Publisher: ASTM International
Year: 2006
ASTM D2392-96(2006) - Standard Test Method for Color Of Dyed Aviation Gasolines
Publisher: ASTM International
Year: 2006
ASTM D4700-91(2006) - Standard Guide for Soil Sampling from the Vadose Zone
Publisher: ASTM International
Year: 2006
ASTM D5474-93(2006) - Standard Guide for Selection of Data Elements for Groundwater Investigations
Publisher: ASTM International
Year: 2006
ASTM D6708-06 - Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
Publisher: ASTM International
Year: 2006
ASTM D3631-99 - Standard Test Methods for Measuring Surface Atmospheric Pressure
Publisher: ASTM International
Year: 1999
ASTM D4930-06 - Standard Test Method for Dust Control Material on Calcined Petroleum Coke
Publisher: ASTM International
Year: 2006
ASTM D5853-06 - Standard Test Method for Pour Point of Crude Oils
Publisher: ASTM International
Year: 2006
ASTM D6376-06 - Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
Publisher: ASTM International
Year: 2006
ASTM D6791-06 - Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
Publisher: ASTM International
Year: 2006
ASTM D3852-06 - Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
Publisher: ASTM International
Year: 2006
ASTM D3427-06 - Standard Test Method for Air Release Properties of Petroleum Oils
Publisher: ASTM International
Year: 2006
ASTM D4931-06 - Standard Test Method for Gross Moisture in Green Petroleum Coke
Publisher: ASTM International
Year: 2006
ASTM D4468-85(2006) - Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
Publisher: ASTM International
Year: 2006
ASTM D7170-06a - Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils-Fixed Range Injection Period, Constant Volume Combustion Chamber Method
Publisher: ASTM International
Year: 2006
ASTM D5781-95(2006) - Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
Publisher: ASTM International
Year: 2006
ASTM D5782-95(2006) - Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
Publisher: ASTM International
Year: 2006
ASTM D3650-93(1999) - Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
Publisher: ASTM International
Year: 1999
ASTM D323-06 - Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
Publisher: ASTM International
Year: 2006
ASTM D1655-06b - Standard Specification for Aviation Turbine Fuels
Publisher: ASTM International
Year: 2006
ASTM D4953-06 - Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
Publisher: ASTM International
Year: 2006
ASTM D3328-06 - Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
Publisher: ASTM International
Year: 2006
ASTM D2887-06 - Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
Publisher: ASTM International
Year: 2006
ASTM D4529-01(2006) - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
Publisher: ASTM International
Year: 2006
ASTM D5060-06 - Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
Publisher: ASTM International
Year: 2006
ASTM D6300-06 - Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
Publisher: ASTM International
Year: 2006
ASTM D6446-01(2006) - Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels (Withdrawn 2012)
Publisher: ASTM International
Year: 2006
ASTM D3682-01 - Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
Publisher: ASTM International
Year: 2001
ASTM D3683-94(2000) - Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
Publisher: ASTM International
Year: 1999
ASTM D3684-01 - Standard Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method
Publisher: ASTM International
Year: 2001
ASTM D3699-01 - Standard Specification for Kerosine
Publisher: ASTM International
Year: 2001
ASTM D3701-01 - Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
Publisher: ASTM International
Year: 2001
ASTM D3703-99 - Standard Test Method for Peroxide Number of Aviation Turbine Fuels
Publisher: ASTM International
Year: 1999
ASTM D3710-95(1999)e1 - Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography
Publisher: ASTM International
Year: 1999
ASTM D3712-91(2000)e1 - Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
Publisher: ASTM International
Year: 1999
ASTM D4371-06 - Standard Test Method for Determining the Washability Characteristics of Coal
Publisher: ASTM International
Year: 2006
ASTM D1129-06a - Standard Terminology Relating to Water
Publisher: ASTM International
Year: 2006
ASTM D5797-06 - Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
Publisher: ASTM International
Year: 2006
ASTM D5798-06 - Standard Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
Publisher: ASTM International
Year: 2006
ASTM D6021-06 - Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
Publisher: ASTM International
Year: 2006
ASTM D6378-06 - Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
Publisher: ASTM International
Year: 2006
ASTM D6751-06a - Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
Publisher: ASTM International
Year: 2006
ASTM D4175-05e1 - Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
Publisher: ASTM International
Year: 2005
ASTM D7261-06 - Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
Publisher: ASTM International
Year: 2006
ASTM D3741-00 - Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
Publisher: ASTM International
Year: 2000
Search Within Energy and Natural Resources