The General Services Administration has authorized the use of this commercial item description in lieu of Interim Federal Specification WW-F-001910. This commercial item description covers double valve faucets for kitchen sinks and lavatories.
This standard specifies requirements for double end studs with a flattened dog point on one thread end. Double end studs are designed primarily to be used for clamping two components together by tightening nuts that are screwed onto both ends. For sizes up to M39, this standard...
This specification covers two classes of double bump through door assemblies to be used on Temper tents and tactical rigid walled shelters (see 6.1).
Damping of floor panel and similar parts PURPOSE This standard aims at establishing the physical properties and controlling quality of the double layer damping plates which is composed of the rubber special sheet (hereinafter called "RSS") and hot fusible damping plate (hereinafter called...
Decoration parts on the external body. (The apply parts are difference to adhesive area of tape, as a rule, it applied to comparatively light weight parts.) PURPOSE This specification specifies the requirements of basic property for patterns and qualities of double-sided adhesive tape used...
This commercial item description covers a double turret, threaded terminal stud for use on terminal boards.
This specification covers one type of double-braided nylon fibrous rope for general purpose use.
This specification covers one type of double-braided polyester fibrous rope for general purpose use.
This information sheet addresses epicyclic gear drives which utilize double helical type gearing on the planetary elements. It is intended to be a supplement to and used in conjunction with ANSI/AGMA 6123--B06, Design Manual for Enclosed Epicyclic Gear Dives. It covers only those topics...