IEEE - Institute of Electrical and Electronics Engineers, Inc. - P2780/D7.0, Sep 2018

IEEE Approved Draft Standard for Insulation Piercing Connectors

inactive
Buy Now
Organization: IEEE - Institute of Electrical and Electronics Engineers, Inc.
Publication Date: 21 May 2019
Status: inactive
Page(s): 1 - 31
ISBN (Electronic): 978-1-5044-5517-6
Standard:

The technical requirements, tests, inspection rules, sign, and package of insulation-piercing connector used in aerial insulated cable lines, bridges and culverts, galleries, tunnels, mines, cable... View More

Document History

2780-2019
July 17, 2019
IEEE Standard for Insulation-Piercing Connectors
The technical requirements, tests, inspection rules, sign, and package of insulation-piercing connector used in aerial insulated cable lines, bridges and culverts, galleries, tunnels, mines, cable...
P2780/D7.0, Sep 2018
May 21, 2019
IEEE Approved Draft Standard for Insulation Piercing Connectors
The technical requirements, tests, inspection rules, sign, and package of insulation-piercing connector used in aerial insulated cable lines, bridges and culverts, galleries, tunnels, mines, cable...

Related Documents

P802.1Qcd/D2.1, Sept 2014 - IEEE Draft Standard for Local and metropolitan area networks - Bridges and Bridged Networks Amendment: Application Virtual Local Area Network (VLAN) Type, Length, Value (TLV)
September 17, 2014 - IEEE - Institute of Electrical and Electronics Engineers, Inc.

This amendment to IEEE Std 802.1Qaz defines enhancements to the set of TLVs used by the Data Center Bridging eXchange (DCBX) protocol for the purpose of simplifying the management of networks utilizing Data Center Bridging features.

P400.4/D8, Sept 2014 - IEEE Draft Guide for Field-Testing of Shielded Power Cable Systems Rated 5kV and Above with Damped Alternating Current Voltage (DAC)
June 24, 2014 - IEEE - Institute of Electrical and Electronics Engineers, Inc.

In this guide is the application of Damped AC (DAC) for field testing 1 of power cables isdescribed. DAC voltage withstand testing and diagnostic tests and measurements that areperformed in combination with DAC voltage application in the field on shielded power cablesystems are discussed. Whenever p...

P1453/D3, Jan 2011 - IEEE Draft Recommended Practice for Adoption of IEC 61000-4-15:2010, Electromagnetic compatibility (EMC--Testing and measurement technique--FlickermeterFunctional and design specifications
March 18, 2015 - IEEE - Institute of Electrical and Electronics Engineers, Inc.

This standard adopts IEC 61000-4-15:2010, which gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be construct...

IEEE P1453/D3, June 2011 - IEEE Draft Recommended Practice -- Adoption of IEC 61000-4-15:2010, Electromagnetic compatibility (EMC)---Testing and measurement techniques---Flickermeter---Functional and design specifications
March 19, 2015 - IEEE - Institute of Electrical and Electronics Engineers, Inc.

This standard adopts IEC 61000-4-15:2010, which gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be construct...

P519.1/D12, Jul 2012 - IEEE Draft Guide for Applying Harmonic Limits on Power Systems
February 26, 2015 - IEEE - Institute of Electrical and Electronics Engineers, Inc.

IEEE Standard 519, IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems [B1], provides procedures for controlling harmonics on the power system along with recommended limits for user harmonic injection and overall power system harmonic levels. This document pr...

Related Products

Searching for related products...

Related Suppliers

Searching for related suppliers...

Advertisement