Society of Motion Picture and Television Engineers - OV 435-0:2012

10 Gb/s Serial Signal/Data Interface

active
Buy Now
Organization: Society of Motion Picture and Television Engineers
Publication Date: 27 September 2012
Status: active
Page(s): 1 - 2
ICS Code (Audio, video and audiovisual systems in general): 33.160.01
ICS Code (Television and radio broadcasting): 33.170
ISBN (Online): 978-1-61482-720-7
DOI: 10.5594/SMPTE.OV435-0.2012
Standard:

SMPTE ST 435 10 Gb/s Serial Signal/Data Interface is a multi-part document

Document History

OV 435-0:2012
September 27, 2012
10 Gb/s Serial Signal/Data Interface
SMPTE ST 435 10 Gb/s Serial Signal/Data Interface is a multi-part document

Related Documents

P1505.3/D8, Nov 2014 - IEEE Draft Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Bench Top Test Requirements Utilizing IEEE 1505 Receiver Fixture Interface Standard
May 22, 2014 - IEEE - Institute of Electrical and Electronics Engineers, Inc.

This document, the Standard for the Universal Test Interface Pin Map Configuration for portable and bench top test requirements utilizing IEEE Std 1505 represents an extension to the IEEE-1505 Receiver Fixture Interface (RFI) Standard Specifications1.Particular emphasis is placed on defining within ...

P1505.3/D10, Feb 2015 - IEEE Draft Standard for the Universal Test Interface Framework and Pin Configuration for Portable/Bench Top Test Requirements Utilizing IEEE 1505 Receiver Fixture Interface Standard
June 9, 2015 - IEEE - Institute of Electrical and Electronics Engineers, Inc.

This document, the Standard for the Universal Test Interface Pin Map Configuration for portable and bench top test requirements utilizing IEEE Std 1505 represents an extension to the IEEE-1505 Receiver Fixture Interface (RFI) Standard Specifications1.Particular emphasis is placed on defining within ...

P1505.1_D8, Jan 2008 - IEEE Draft Trial-Use Standard for Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Standard 1505
January 1, 2008 - IEEE - Institute of Electrical and Electronics Engineers, Inc.

This document, the IEEE 1505.1 Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Standard 1505 represents an extension to the IEEE-1505 Receiver Fixture Interface (RFI) Standard Specifications. Particular emphasis is placed on defi...

P802.11u/D5.0, Feb 2009 - IEEE Draft STANDARD for Information Technology--Telecommunications and information exchange between systems--Local and metropolitan area networks--Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment 7: Interworking with External Networks
January 1, 2009 - IEEE - Institute of Electrical and Electronics Engineers, Inc.

This amendment specifies enhancements to the 802.11 MAC that support WLAN Interworking with External Networks. It enables higher layer functionalities to provide overall end-to-end solutions. The main goals of 802.11u are aiding network discovery and selection, enabling information transfer from ext...

ST 2081-30:2017 - Transport of Multiple 3Gb/s or 1.5Gb/s Signals on a 6G-SDI Link
September 21, 2017 - Society of Motion Picture and Television Engineers

This Standard defines the defines the combination of four HD-SDI signals or two 3G-SDI signals into a 6G-SDI interface. - MODE 1: Carriage of two SMPTE ST 425-1 3G-SDI signals on a 6G-SDI 10-bit interface as defined in section 6 Single-link 6G-SDI 10-bit Multiplex - MODE 2: Carriage of...

Related Products

Searching for related products...

Related Suppliers

Searching for related suppliers...

Advertisement